This ball joint is most commonly used for (but not limited to) the front A arm on 150cc ATVs. Approximate length of 7.8cm with an 11mm thread. The core cylinder unit is approximately 32 mm in diameter... More Details

This ball joint is most commonly used for (but not limited to) the front A arm on 150cc ATVs. Approximate length of 7.8cm with an 11mm thread. The core cylinder unit is approximately 32 mm in diameter... More Details

This ball joint is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. Ball joint has a threaded post diameter ... More Details

This ball joint is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. Ball joint has a threaded post diameter ... More Details

Ball joint **WITH THREADS**(Manufacturer lists both a threaded and unthreaded version under the same part number, for the unthreaded version please see our part number 70A6257). Universal joint b, swi... More Details

Ball joint **WITHOUT THREADS**(Manufacturer lists both a threaded and unthreaded version under the same part number, for the threaded version please see our part number 70A6256). Universal joint b, sw... More Details

Ball joint. Universal joint a, swing arm. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well ... More Details

Ball joint. Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement machines. Common Jianshe ... More Details

Ball joint. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc and Hisun 800cc 4x4 ATVs and Hisun 700cc and 800cc UTVs, as well as many other clones, rebrands and ... More Details

This Ball Joint (main pin comp.) is most commonly (but not exclusively) used for CFMoto ATVs and UTVs such as CF500US, CF500-3, CF500UU, CF600-3, CF625-3, CF625-6, CF625-3, CF800, CF800UU, CF800US, CF... More Details

This ball joint is most commonly used for (but not limited to) the front A-arms on 50cc to 300cc ATVs, primarily 110cc, 125cc, 150cc and 250cc ATVs. Threaded Post approximately 11mm (approximate maxi... More Details

This ball joint is most commonly used for (but not limited to) the front A-arms on 50cc to 300cc ATVs, primarily 110cc, 125cc, 150cc and 250cc ATVs. Approximate length of 8.2cm with an 12mm thread. T... More Details

This ball joint is most commonly used for (but not limited to) the front A-arms on 50cc to 300cc ATVs, primarily 110cc, 125cc, 150cc and 250cc ATVs. Threaded Post approximately 13mm (approximate maxi... More Details

This ball joint stud is typically found in the A-Arm / Front A-Arm / Front Suspension section of several part manuals. Commonly used for but not limited to 300cc, 325cc, 500cc, and 550cc engines. It ... More Details

Ball Joint - Front Rocker Buttonhead. This front rocker ball joint set is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format for many UTVs i... More Details

Lower Ball Joint most commonly (but not exclusively) used for CFMoto ATVS and UTVS such as CF400AU, CF400ATR, CF500(ABCDE), CF500-2(A), CF500AU, CF500ATR, CF600, CF625-2(A), CF625-C(B), CF800ATR, CF80... More Details

Tie rod, rod end. Set of 2pcs (left and right, including 1pc 27230-5000 standard thread and 1pc 27240-5000 reverse thread). This ball joint profile is commonly applicable for many big brand and less... More Details

Upper Ball Joint most commonly (but not exclusively) used for CFMoto ATVS and UTVS such as CF400AU, CF400ATR, CF500(ABCDE), CF500-2(A), CF500AU, CF500ATR, CF600, CF625-2(A), CF625-C(B), CF800ATR, CF80... More Details

Ball joint. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clones, rebrands... More Details

This 2pc ball joint set has a threaded post diameter of approximately 12mm with 6.7cm total length. The core cylinder unit is approximately 32mm in diameter (excluding the lip). This ball joint is mo... More Details

This ball joint has a threaded post diameter of approximately 12mm with 6.9cm total length. The core cylinder unit is approximately 34mm in diameter (excluding the lip). This ball joint is most commo... More Details

Ball Joint - Swing Arm, FR (Lower). Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly ... More Details

Ball Joint - Swing Arm, FR (Upper). Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly ... More Details

Double wall alloy bicycle rim and electric motor wheel assembly, 750W, 48V with 22x1.75 tire. Most commonly (though not exclusively) used for 750W, 48V electric bicycles (ebikes). ... More Details

Dust cover / ball joint cover for (but not limited to) 300cc to 400cc ATVs, dirt bikes, scooters, buggies and other powersports products. Manufacturer part number 4.2.01.1030. Applies primarily to (bu... More Details

This ball joint rubber boot set is most commonly used for (but not limited to) the front A arm on 50cc to 500cc ATVs. ... More Details

1/2" - 14mm male thread rod end, rod end has 1/2" hole (13.9mm). Low carbon steel housing. Ball is heat treated, precision ground and hard chrome plated. The body has a protective coating for corrosi... More Details

3/8"-10mm female rod end. Left hand thread. Rod end has 3/8" hole (9.9mm). Low carbon steel housing. Ball is heat treated, precision ground and hard chrome plated. The body has a protective coating f... More Details

3/8"-10mm female rod end. Right hand thread. Rod end has 3/8" hole (9.9mm). Low carbon steel housing. Ball is heat treated, precision ground and hard chrome plated. The body has a protective coating ... More Details

Rod End - Heim Joint, Spherical Bearing, M14, XY500UE, XY600UE, UTV. This rod end (aka Heim joint) is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and sim... More Details

Rod End - Heim Joint, Spherical Bearing, M14. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. ... More Details

Steering tension rod - ballpin assembly (Tie Rod). Set of 2pcs. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the worl... More Details

Tie Rod. Most commonly used for (but not limited to) 300cc and 550cc liquid cooled ATV's, UTVs, dune buggies, go karts and other similar products. Manufacturer part number 3.1.01.1000. Popularly app... More Details

This tie rod is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. Common Liangzi model names consist of varia... More Details

Tie rod. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other c... More Details

Tie rod. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machines are commonl... More Details

Tie rod. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. ... More Details

Tie rod. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machines are commonl... More Details

Tie rod / Balance lever. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clo... More Details

This anti-roll bar tie rod (left side) is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. Common Liangzi mo... More Details

This anti-roll bar tie rod (right side) is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. Common Liangzi m... More Details

This tie rod end is typically found in the A-Arm / Front Suspension / Steering Column section of several part manuals. Commonly used for but not limited to 260cc, 300cc, 325cc, 330cc, 400cc, 500cc, a... More Details

Steering tie rod end. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machine... More Details

Steering tie rod end. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and s... More Details

Steering tie rod end. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and s... More Details

This tie rod end (steering knuckle) with M10/M12 thread housing is most commonly (but not exclusively) used for CFMoto ATVs and UTVs such as CF500US, CF500UU, CF625-3, CF800, CF800-3, CF800US-A, CF800... More Details

Left side . Right side tie rod end (ball joint stud), M12x1.25 ball stud, M14 threaded housing, commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands... More Details

These tie rods ends are made from hardened and corrosion resistant steel. The ball stud has a thread length of 20mm with M12x1.25 nut. The housing has a thread length of 40mm with a M12 nut. Standard ... More Details

These tie rods ends are made from hardened and corrosion resistant steel. The ball stud has a thread length of 29mm with M12x1.25 nut. The housing has a reverse thread length of 40mm with a M12 nut. ... More Details

This steering tie rod end is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. Common Odes model names consist of variations of "... More Details

Right side tie rod end, M12x1.25 Ball Stud, M14 Threaded Housing. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs,... More Details

These tie rods ends are made from hardened and corrosion resistant steel. The ball stud has a thread length of 18mm with M12x1.25 nut. The housing has a thread length of 74mm with a M16 nut. ... More Details

These tie rods ends are made from hardened and corrosion resistant steel. The ball stud has a thread length of 29mm with M12x1.25 nut. The housing has a total thread length of 65mm with a M16 inner nu... More Details

These tie rods ends are made from hardened and corrosion resistant steel. The ball stud has a thread length of 21mm with M14x1.25 nut. The housing has a thread length of 71.6mm with a M16 nut. ... More Details

This is a 100mm tie rod set with a 10mm bolt diameter. 100mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and corrosion resistant steel. Tie rod... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 100mm in length. 100mm refers to the length of the central hexagonal adjustment bar. These tie rods are made ... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 110mm in length. 110mm refers to the length of the central hexagonal adjustment bar. These tie rods are made ... More Details

This is a 115mm tie rod set with a 10mm bolt diameter. 115mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and corrosion resistant steel. Tie rod ... More Details

This is a 115mm tie rod set with a 10mm bolt diameter. 115mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and corrosion resistant steel. Tie rod... More Details

This is a 120mm tie rod set with a 10mm bolt diameter. 120mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and corrosion resistant steel. Tie rod... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 150mm in length. 150mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 170mm in length. 170mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 180mm in length (referring to the length of the central hexagonal adjustment bar). These tie rods are made from ... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 190mm in length. 190mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 200mm in length. 200mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 210mm in length. 210mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 230mm in length. 230mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 240mm in length. 240mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 250mm in length. 250mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 260mm in length. 260mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 270mm in length. 270mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 280mm in length. 280mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 290mm in length. 290mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 300mm in length. 300mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 49cc to 150cc 2 stroke and 4 stroke ATVs. This tie rod has a 10mm thread diameter and is 30mm in length. 30mm refers to the length of the cen... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 310mm in length. 310mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 315mm in length. 315mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 320mm in length. 320mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 340mm in length. 340mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 350mm in length. 350mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro... More Details

This tie rod set is commonly used for (but not limited to) 39cc, 47cc and 49cc 2-stroke ATVs as well as smaller 50cc to 110cc 4 stroke ATVs. This tie rod has a 7mm thread diameter and is 50mm in leng... More Details

This is a 75mm tie rod set with a 10mm bolt diameter. 75mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and corrosion resistant steel. Tie rod a... More Details

This tie rod set is commonly used for (but not limited to) 39cc, 47cc and 49cc 2-stroke ATVs as well as smaller 50cc to 110cc 4 stroke ATVs. This tie rod has a 7mm thread diameter and is 80mm in leng... More Details

This is a 85mm tie rod set with a 10mm bolt diameter. 85mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and corrosion resistant steel. Tie rod a... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 90mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and co... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 90mm in length. 92mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from ... More Details

This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 95mm in length. 95mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from ... More Details

This tire is most commonly (but not exclusively) used for Kids' standup scooters and hoverboards. Tire Measurement: 200x50 (10x2) Max Load: 250kPa (36psi) ... More Details

This tire is most commonly (but not exclusively) used for Kids' standup scooters and hoverboards. Tire Measurement: 8.5x2 Max Load: 75kg (165lbs) at 340kPa (50psi) cold ... More Details

Left Universal Joint. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and s... More Details

Right Universal Joint. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement... More Details

Standard profile TR87, PVR70, VS02, B179 valve stem includes valve stem cap. Often referred to as 'angled' or 'bent' valve. Commonly (but not exclusively) used for motorized and electric vehicles su... More Details