Select Category
Fuel / Gas / Oil Systems
Oil Seal - 20mm ID, 37mm OD, 7mm Thick - 20A5573 - PBC394EF1
Bearings, Bushings & Seals, O-rings, Oil & Bearing Seals, Oil Seals
$3.73
This universal seal size is commonly (though not exclusively) used for engine case seals, crankshaft seals and transmission seals. Approximate dimensions:
Outside Diameter: 37mm
Inside Diamete...
More Details
Oil Seal - 30mm ID, 45mm OD, 5mm Thick - 20A5575 - PBC299F1
Bearings, Bushings & Seals, O-rings, Oil & Bearing Seals, Oil Seals
$6.50
This universal seal size 30x45x5 is commonly (though not exclusively) used for engine case seals, crankshaft seals and transmission seals.
Approximate dimensions:
Outside Diameter: 45mm
I...
More Details
Oil Seal - 30mm ID, 47mm OD, 7mm Thick - 20A5577 - PBC298F1
Bearings, Bushings & Seals, O-rings, Oil & Bearing Seals, Oil Seals
$6.50
This universal seal size 30x47x7 is commonly (though not exclusively) used for engine case seals, crankshaft seals and transmission seals.
Approximate dimensions:
Outside Diameter: 47mm
I...
More Details
Oil Seal - 35mm ID, 65mm OD, 9mm Thick, ATV, Hisun, 500-700cc - 20A5579 - PBC295F1
Bearings, Bushings & Seals, O-rings, Oil & Bearing Seals, Oil Seals
$32.53
Universal seal size. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement m...
More Details
Oil Seal - 65mm/90mm/9mm, 400-800cc, Hisun - 20A5580 - PBC297F1
Bearings, Bushings & Seals, O-rings, Oil & Bearing Seals, Oil Seals
$20.33
Oil Seal, 65/90/9mm. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clones,...
More Details
Oil Strainer Cover - 250CC, ATV, Jianshe, Baja - 20A5610 - PBC1516F1
Fuel / Gas / Oil Systems, Oil Seals
$24.39
Engine Oil Fine Strainer Cover. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. Common format for many machi...
More Details
Oil Filter Net - Strainer, UTV, Hisun, 800cc - 20A5612 - PBC2601F1
Fuel / Gas / Oil Systems, Oil Filters
$16.26
Engine Oil Filter Net (Strainer). Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines.
These...
More Details
O-ring. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines.
These machines are commonly manuf...
More Details
Dip stick / oil stick. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines.
These machines a...
More Details
Oil filter joint (connecting head). Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, ...
More Details
Dip Stick O-Ring - 61.5x2.4, UTV, Hisun, 800cc - 20A5760 - PBC2568F1
Fuel / Gas / Oil Systems
$16.26
Spring plate. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines.
These machines are common...
More Details
O-ring. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines.
These machines are commonly man...
More Details
On Back Order
You can still reserve this item now.
O-ring. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines.
These machines are commonly manuf...
More Details
Oil Rotor - Oil Slinger, 250cc, CG250, Vertical Engine, Small, 19 Spline - 20A5800 - PBC2508F1
Fuel / Gas / Oil Systems, Fuel / Gas & Oil Pumps
$28.46
This oil rotor / oil slinger is commonly (though not exclusively) used for 250cc vertical engine types. Approximate dimensions are:
Total Length: 47mm
Outside Diameter: 62.6mm
Shaft Ope...
More Details
Oil Rotor - Oil Slinger, 250cc, CG250, Vertical Engine, Large, 19 Spline - 20A5810 - PBC2519F1
Fuel / Gas / Oil Systems, Fuel / Gas & Oil Pumps
$28.46
This oil rotor / oil slinger is commonly (though not exclusively) used for 250cc vertical engine types. Approximate dimensions are:
Total Length: 47mm
Outside Diameter: 72.6mm
Shaft Open...
More Details
Cone oil screen. Approximate dimensions are:
Total Height: 27.6mm
Rubber Gasket:
Outer Diameter: 25mm
Inner Diameter: 16.2mm
...
More Details
Oil Filter Screen - Cone, 250cc, 260cc, 300cc - 20A5905 - PBC2553F1
Fuel / Gas / Oil Systems, Oil Filters
$5.69
This conical oil screen applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a wide...
More Details
Oil Screen Filter - Flat with built in rubber gasket. Commonly used for (but not limited to) 50cc to 300cc horizontal engines. Approximate dimensions:
Length: 45.8mm
Width: 41.6
Depth: ...
More Details
Oil Filter Screen - ATV, Hisun, 500-700cc - 20A5940 - PBC2488F1
Fuel / Gas / Oil Systems, Oil Filters
$32.53
Oil filter screen. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement mac...
More Details
Fuel injector. Commonly used for (but not limited to) 500cc engines, such as the Hisun 500cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines.
These machines are c...
More Details
This Fuel Injector, ATV, Hisun, 800cc is used for a wide displacement range of ATVs.
Most popularly applies to 800cc ATVs from companies like Hisun (HSUN) and Powermax.
Common listed manufacturer p...
More Details
Fuel injector. Commonly used for (but not limited to) 700cc engines, such as the Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines.
These machines are c...
More Details
Injector Seat - CFmoto, 400cc, 500cc, 550cc ATV, UTV - PBC20369FF1
Fuel / Gas / Oil Systems, Fuel / Gas & Oil Pumps
$61.00
This injector seat is most commonly (but not exclusively) used for CFmoto ATVs and UTVs such as 191Q, 191R,CF500AU-7S, 191R-C, CF500AU-6B, 191R-U550, 191R-X550, 191R-Z550, and many other makes, model...
More Details
On Back Order
You can still reserve this item now.
Fuel Injector Mounting Seat - ATV/UTV, Hisun, 400-800cc - 20A7950 - PBC2556F1
Fuel / Gas / Oil Systems
$16.26
Fuel injector mounting seat. Commonly used for (but not limited to) 400cc, 500cc and 800cc engines, such as the Hisun 500cc and Hisun 800cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones,...
More Details
On Back Order
You can still reserve this item now.
Fuel Injector Mounting Seat - ATV, Hisun, 400-700cc - 20A7970 - PBC2471F1
Fuel / Gas / Oil Systems
$16.26
Fuel injector mounting seat. Commonly used for (but not limited to) 400cc and 700cc engines, such as the Hisun 400cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displa...
More Details
On Back Order
You can still reserve this item now.
